Using The Transparency Unit - Epson Perfection 4870 Product Information

4. Click the button at the bottom of the screen. Your
Preview
photo appears in the Preview window.
5. Click the button to select the image area to be scanned.
Adjust the marquee if necessary.
6. Do one of the following:
❏ If you're using Home Mode, click the
button.
Adjustments
❏ If you're using Professional Mode, scroll to the bottom
of the screen.
7. Select the or
Digital ICE
❏ If your photo is dirty, scratched, creased, or torn, select
.
Digital ICE
❏ If the colors in your photo are faded, select
.
Restoration
Note:
You can select both settings if necessary.
8. Click the button.
Scan
9. Click the button. Your image now appears in
Close
Photoshop Elements.
Image
checkbox:
Color Restoration
Color
Scanning Transparencies and Film
Before scanning transparent documents, you need to remove
the scanner's reflective document mat; this exposes the scanner's
transparency unit (light source), which is built into the lid.
If you're scanning slides or film strips, you'll also need to use
one of the film holders.

Using the Transparency Unit

1. Make sure the transparency unit cable is connected to the
option interface connector on the back of the scanner.
(If it is not connected, turn off the scanner, connect the
transparency unit cable, then turn the scanner back on.)
2. Lift the scanner lid all the way up and pull the reflective
document mat up and off of the scanner lid, as shown.
3. If you are scanning film or negatives, open the cover, then
slide the film into the corresponding holder, with the film's
shiny base side facing down. (If you are scanning slides, go
to step 6.)
12/03
EPSON Perfection 4870 Series
EPSON Perfection 4870 Series - 3