Download Print this page

Century C-VFF30 Instructions Manual

Lockoff/filterб repair kit

Advertisement

Quick Links

moDel c-vFF30 locKoFF/FilteR
Important: Any maintenance,
service or repair should be
performed by trained and
experienced service technicians.
Proper tools and equipment
should be used to prevent injury
to the servicing technician,
property or system components.
Service repairs should always be
performed in a safe environment
and the technician should always
wear protective clothing to
prevent injury.
The Form 103-2 repair kit
instructions will provide the
technician information to
successfully repair the VFF30
Lockoff. Always inspect the
major casting pieces for damage,
corrosion or cracks before
attempting a service repair. Be
sure the repair kit part number
you are using is correct for
the Lockoff being serviced.
Diaphragms are color coded
and have different performance
characteristics.
YELLOW:
Silicone
material is the optional upgrade
material that provides excellent
flexibility in cold weather climates
and is more resistant to chemical
contamination.
BLUE: diaphragm material
provides excellent high and
low temperature durability with
increased chemical resistance.
This material is recommended
for turbo applications.
Page 1 of 14
REPAIR KIT INSTRUCTIONS
diaphragm
part #
C-RK-VFF30 Repair Kit, C-VFF30 (Standard Hydrin Diaphragm)
C-RK-VFF30-2 Repair Kit, C-VFF30 (Silicone Diaphragm)
C-RK-VFF30-3 Repair Kit, C-VFF30 (Blue Diaphragm)
C-RK-VFF30-958 Repair Kit, C-VFF30 Blue Diaphragm, Hyster
Do not use Teflon tape to seal any
fuel fittings. Failure to follow this
warning may cause internal leaks
resulting in serious injury and/or
property damage.
RepaiR Kit paRt NumbeRs
Description
C-VFF30 Repair Kit Instructions (Form 103-2)

Advertisement

loading

Summary of Contents for Century C-VFF30

  • Page 1 RepaiR Kit paRt NumbeRs for turbo applications. part # Description C-RK-VFF30 Repair Kit, C-VFF30 (Standard Hydrin Diaphragm) C-RK-VFF30-2 Repair Kit, C-VFF30 (Silicone Diaphragm) C-RK-VFF30-3 Repair Kit, C-VFF30 (Blue Diaphragm) C-RK-VFF30-958 Repair Kit, C-VFF30 Blue Diaphragm, Hyster Page 1 of 14...
  • Page 2 When replacing screws, be sure to properly match thread type (self-tapping or machined) as the two types are not interchangeable. Page 2 of 14 C-VFF30 Repair Kit Instructions (Form 103-2)
  • Page 3 RebuilD iNstRuctioNs Disassembly 1. Remove 10 screws from “Fuel In” cover. Remove cover C-GI-89 gasket. 3. Remove C-F1-10 filter and screen C-S7-3. 4. Remove C-S1-15265-002 screw retaining valve spring. Page 3 of 14 C-VFF30 Repair Kit Instructions (Form 103-2)
  • Page 4 Using small flat head screwdriver, remove C-S4-18 valve seat. 7. Gently lift up and remove the C-P1-15 valve operating pin. 8.With paper clip or wire, fashion a hook as shown. Page 4 of 14 C-VFF30 Repair Kit Instructions (Form 103-2)
  • Page 5 10. Insert paper-clip hook in center hole of C-W1-42 seal retaining washer and remove. 11. Using the same hook, remove the pin seal C-S3-116 through valve jet. 12. Remove 6 screws on diaphragm cover side. Page 5 of 14 C-VFF30 Repair Kit Instructions (Form 103-2)
  • Page 6 Do not use harsh solvents such as brake or carburetor cleaner on any of the non-metallic components as they will damage this material. Page 6 of 14 C-VFF30 Repair Kit Instructions (Form 103-2)
  • Page 7 C-H1-14236 Seal Holder passage is tapered and the wide opening of the seal holder should be facing up. 16. Place the C-VFF30 body with the filter side up, as shown in the photo, on a flat surface. Ensure that the groove in the seal is visible from the top of the taper of the seal holder.
  • Page 8 17. Place the holder in the up position and slide the holder into the seal into the body of the C-VFF30. Looking through the fuel port, position the seal above the cavity of the seal recess. 18. Coat the installation pin C-P1-...
  • Page 9 23. Valve seat shown with aluminum side up ready to be placed on jet. 24. Place the seat with the viton (black rubber) side down, in position on jet. Page 9 of 14 C-VFF30 Repair Kit Instructions (Form 103-2)
  • Page 10 Tighten screw to 30 +/-3 in-lbs. 27. When spring is in place, lift slightly to ensure it can move freely. 28. Insert C-S7-3 screen and filter C-F1-10 into recess. Page 10 of 14 C-VFF30 Repair Kit Instructions (Form 103-2)
  • Page 11 “Fuel In” cover and place on gasket. Thread the two screw C-S1-15266-001 through the gasket and into the body. 32. Insert remaining 8 screw in their openings. Page 11 of 14 C-VFF30 Repair Kit Instructions (Form 103-2)
  • Page 12 (there is only one position in which the holes will line up). 36. Place cover in correct position and insert screws C-S1-15265-001. Page 12 of 14 C-VFF30 Repair Kit Instructions (Form 103-2)
  • Page 13 Lockoff for leaks. If leaks are found, the Lockoff must be replaced. If no leaks are found, the Lockoff can be reinstalled and returned to service. Page 13 of 14 C-VFF30 Repair Kit Instructions (Form 103-2)
  • Page 14 FAILURE TO ABIDE BY THE ABOVE WILL VOID ANY IMPCO WARRANTY ON THE PRODUCTS AND MAY CAUSE SERIOUS INjURY OR PROPERTY DAMAGE. DUE TO THE INHERENT DANGER OF GASEOUS FUELS THE CENTURY PRODUCTS SHOULD NOT BE INSTALLED OR USED BY PERSONS NOT KNOWLEDGEABLE OF THE HAzARDS ASSOCIATED WITH THE USE OF GASEOUS FUELS.