SERVICE MODE
COPIER>ADJUST
4.2 FEEDER
The following items are available under FEEDER>ADJUST.
DOCST-RP
Use it to adjust the original stop position for bottom pickup.
Settings
-100 to 100 (unit: 0.5 mm, default: 0)
1) Select this item, and place an original on the original tray.
2) Press the OK key. (The original will be fed.)
3) Open the DF slowly, and check the position of the original on the
S-76
copyboard glass.
• If the original is to the left of the reference point, increase the setting.
• If the original is to the right of the point, decrease the setting.