Changing The Aspect For Computer Images; Configuration Menu - Epson PowerLite Pro Z8000WUNL User Manual

Functions for Enhancing Projection

Changing the Aspect for computer images

You can change the aspect of projected images input from the Computer, DVI-D, or HDMI input port as follows. The default aspect ratio is 16:10 because
of the wide panel mounted on the projector. When projecting onto 16:9 screens, set the Aspect to 16:9.
If parts of the image are missing or the image is not projected properly, set Wide or Normal in Resolution from the configuration menu depending on the
size of the computer screen.
Set Values
Normal
(When the input source is
a Computer, DVI-D, or
BNC)
Auto
(Only available when the
input source is HDMI)
16:9
Operation
Projects to the full projection size
retaining the Aspect of the input
image.
Projects in an appropriate aspect
based on information from the signal
being input.
Projects to the full projection size at
an Aspect of 16:9.
When a 1024x768 signal is input
When a 1024x768 signal is input.
Projection example
49