Optional Accessories; Related Documentation; Resetting The Lamp Timer - Epson PowerLite Cinema 550 Product Information

Epson powerlite cinema 550: product information

Hide thumbs Also See for PowerLite Cinema 550:

User manual (78 pages)

Parts list (1 page)

User manual (1 page)

Table Of Contents

Table of Contents

Epson PowerLite Cinema 550

5. Loosen the two screws securing the lamp (they don't come

all the way out).

6. Grasp the lamp as shown and pull it straight out.

Warning

The lamp(s) in this product contain mercury.

Please consult your state and local regulations regarding

disposal or recycling. Do not put in the trash.

7. Gently insert the new lamp and tighten its screws.

Caution: Don't touch the glass portion of the lamp assembly.

Touching the glass could result in premature lamp failure.

8. Replace the cover. (The projector won't work if the lamp

cover is open or loose.)

9. Reset the lamp usage timer, as described in the next section.

Resetting the Lamp Timer

After installing a new lamp, you need to reset the timer so the

projector can keep track of how many hours it has been used.

1. Press the

button on the projector or remote control.

2. Use the menu navigation buttons to open the

then select

Reset Lamp Hours

3. When you see a confirmation prompt, highlight

press the

button.

Select

4. When you're finished, press the

The lamp usage timer doesn't register until you've used the

lamp for at least 10 hours.

10 - Epson PowerLite Cinema 550

menu,

Reset

and

Yes

button to exit.