Epson PowerLite 8300i Quick Manual page 10

Using Keystone Correction
To adjust your image when the right and left sides are uneven,
do one of the following:
Use the buttons on the projector's control panel
Keystone
to adjust the image shape.
Keystone buttons
Or use the Keystone function in the
projector's menu system. (Press the
button on the remote control, select the
menu, and press
Setting
Setting menu, select
Keystone
. Then select
Enter V-Keystone
. Adjust the setting as needed.)
Enter
Note: After using Keystone correction, the image will be slightly
shorter. If it's important to maintain the correct aspect ratio, you
can stretch the image to its proper size using the
the Keystone menu.
Using Quick Corner
Use Quick Corner to correct the image shape when it's
uneven on the top and bottom, or on all sides.
1. Press the button on the remote control (or on the
Menu
projector's control panel).
2. Select the menu and press
Setting
3. From the Setting menu, select
4. Select and press
Quick Corner
You see this screen:
Menu
. From the
Enter
and press
and press
Menu button
setting in
Height
.
Enter
and press
Keystone Enter
.
Enter
EPSON PowerLite 8300i Projector
5. Press the
Enter
adjust.
6. Use the pointer button on the remote control (or the
arrow buttons on the projector) to adjust the shape.
7. Repeat steps 5 and 6 as needed to adjust any remaining
corners.
8. When done, press
Correcting Computer Images
If you've connected a computer and the image doesn't look
right or fit properly on the screen, press the
the remote control (or the
projector's control panel). This automatically resets the
projector's tracking, sync, resolution, and position settings.
Note: You must be projecting an image for this button to have
any effect. The
Auto
.
5/03
button to select the corner you want to
to exit the menu system.
ESC
Auto
button on the
Auto/Enter
Auto button
button works only with computer images.
EPSON PowerLite 8300i Projector
button on
9
-