Table of Contents
Advertisement
Switching Sources
1.
Press the
the remote control and you will see the picture above.
2.
Use ▲▼ buttons to select the source you want to switch to and press the
ENTER button in the middle of the ▲▼ buttons.
3.
If you have connected coax cable (the cable with a needle in the middle
and a ring to tighten the connection) from the box to the display, you'll
need to change to the correct channel. Make sure your source is TV
and press 3 and ENTER on the display remote. If that does not work
you'll need to connect your Satellite or Cable Company for support.
***TV Source is optional. It may not be equipped in your product. Please check with the seller, distributor or
Sceptre Customer Services.
button on the side of the HD Display or the SOURCE button on
- 23 -
www.SCEPTRE.com
SCEPTRE UMR Series UHD Display User Manual
Advertisement
Table of Contents
