Understanding the printer menus
Use
Factory Defaults
Do Not Restore
Restore Now
Custom Home Message
Off
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text [x]
Export Configuration File
Export
1
This menu item appears only in touch‑screen printer models.
2
This menu item appears only in non‑touch‑screen printer models.
Flash Drive menu
Note: This menu appears only in touch‑screen printer models.
Use
Copies
1–999
Paper Source
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Sides (Duplex)
1 sided
2 sided
2
1
To
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Set a default paper source for all print jobs.
Note: Tray 1 (standard tray) is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
Specify whether prints are on one side or on both sides of the paper.
Note: 1 sided is the factory default setting.
To
Restore the printer factory default settings.
Notes:
•
Do Not Restore is the factory default setting.
•
Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in the RAM are deleted. Downloads
stored in the flash memory or on a hard disk are not
affected.
Select a custom home message that appears as an alternating
display of the printer status.
Note: Off is the factory default setting.
Export configuration files to a flash drive.
146