Dell EMC VxFlex Ready Node 14G Manual page 48

Port Configuration
Hardware Configuration and Operating System Installation Guide - ESXi Servers
48
4. Select Configure Management Network, and press Enter.
5. In the Configure Management Network window, select Network Adapters,
and press Enter.
6. Using the Up/Down arrow keys, scroll to the appropriate vmnic for your
hardware (the management port vmnic differs per server type: 1U1N, 2U1N
Storage-Only, 2U1N Converged, etc.)
7. Select the desired vmnic by pressing the Space bar.
8. Click OK to approve the selection.
9. In the Configure Management Network window, scroll to IP Configuration,
and press Enter.
10. In the IP Configuration popup window, change the selected option to Set
static IP address and network configuration, using the Up/Down arrow keys
for navigation and the Space bar for selection.
11. Use the Up/Down arrow keys to move to the IP address fields, and type the
node's Management IP Address, Subnet Mask, and Default Gateway.
12. Press Enter to apply the IP address changes.
13. In the Configure Management Network window, press Esc to exit the window.
When the confirmation popup window appears, press Y to approve and apply
the configuration.
Results
Configuration of the Management IP address is now complete. The node can now be
connected to a vCenter. Once connected, validate that the IP address configuration
performed in these steps is correct.
Note
Data IP addresses, vSwitches, and all Storage VM IP addresses are configured during
the plug-in deployment flow.