Advertisement
3.1.14 Removing the power transformer 1 with the power 2 board
(See Fig.19)
• Prior to performing the following procedure, remove the top
cover, side panels, stay bkt and regulator board.
(1) From top side of the main body, disconnect the wire from
the connector
CN46
and
(2) Remove the two screws R attaching the power transformer
1.
3.1.15 Removing the thermal SW 1 board
(See Fig.19)
• Prior to performing the following procedure, the top cover, side
panels, stay bkt and regulator board.
(1) From top side of the main body, remove the screw S
attaching the thermal SW 1 board.
3.1.16 Removing the power transformer 2
(See Figs.20 and 21)
• Prior to performing the following procedure, remove the top
cover, side panels, stay bkt and regulator board.
(1) From the top side of the main body, disconnect the wire
from the connector
CN701
fig.20)
(2) Remove the solder points
trans 1 board. (See fig.21)
(3) Remove the four screws T attaching the power transformer
2. (See fig.21)
1-10 (No.MB177)
All manuals and user guides at all-guides.com
CN47
on the power 2 board.
on the power amp. board. (See
PW81
and
PW82
on the power
Power transformer 1
CN47
Thermal SW
1 board
S
Fig.19
CN701
Fig.20
Power trans 1
board
T
Power transformer 2
Fig.21
Power 2 board
CN46
R
Power amp. board
PW81 PW82
T
Advertisement
