Starting / Stopping The Engine - Stihl KB-MM Instruction Manual

Installing the Bristle Brushes
5
2
Push the bristle brush (5) onto the
N
axle (2) .
Insert the hitch pin (6) in the hole at
N
the end of the axle and fold it flat.
Use the same procedure to mount
N
the other bristle brush.
WARNING
Always mount both bristle brushes.
Installing the PowerSweep
5
2
Push the sweeper drum (5) onto the
N
axle (2) – as shown .
Insert the hitch pin (6) in the hole at
N
the end of the axle and fold it flat.
Use the same procedure to mount
N
the other sweeper drum.
KB-MM, KW-MM
WARNING
Always mount both sweeper drums.
Deflector Extensions
6
Deflector extensions come standard
with the bristle brush and are available
as special accessories for the
PowerSweep.
Deflector extensions can only be
mounted to the large deflector – see
"Main Parts".
1
The left and right deflector extensions
are different.
Mounting the Deflector Extensions
Slide the right-hand extension onto
N
the deflector, push it fully home at
the top and bottom and engage the
6
tab (1).
Slide the left-hand extension onto
N
the deflector, push it fully home at
the top and bottom and engage the
tab (1).
Removing the Deflector Extensions
Use the combination wrench to
N
disengage the tabs (1) and then pull
off the extensions.
Starting / Stopping the
Engine
Starting the Engine
Always follow the starting procedure
described in the MultiEngine instruction
manual.
1
Secure the handlebar in the normal
N
operating position.
Retract the wheels, if fitted – see
N
chapter on "Wheels" in MultiEngine
instruction manual.
Retract the spur, if fitted.
N
English
11