Replacing The Lamp - Epson PowerLite 52c User Manual

note
You can check to see how
many hours the lamp has
been used with the About
menu. See page 39.
warning
Let the lamp cool before
replacing it. If the lamp
breaks, handle the shards
carefully to avoid injury.
Maintaining and Transporting the Projector
44
5. To install the new filter, slide it onto the projector, making sure to
insert the tabs into the slots, until it clicks in place.

Replacing the Lamp

The projection lamp typically lasts for about 1500 hours of use. It is
time to replace the lamp when:
The projected image gets darker or starts to deteriorate.
The warning light is red, flashing red, or flashing orange.
The message
LAMP REPLACE
lamp comes on (after about 1400 hours of use). To maintain
projector brightness and image quality, replace the lamp as soon
as possible.
Contact your dealer or call EPSON at (800) 873-7766 in the United
States for a replacement lamp. Request part number V13H010L1D.
In Canada, please call (800) 463-7766 to locate a dealer.
Follow these steps to replace the lamp:
1. Turn off the projector, wait for the cool down period to end
(when the power light stops flashing and remains orange), then
unplug the power cord.
2. If the projector has been on, let it cool down for at least half an
hour after you unplug it.
3. Turn the projector upside-down to access the lamp compartment.
appears on the screen when the