NETGEAR Nighthawk R7200 User Manual page 125

Nighthawk AC2100 Smart WiFi Router Model R7200
When you connect the USB storage device to the router's USB port, it might take up
to two minutes before it is ready for sharing. By default, the USB storage device is
available to all computers on your local area network (LAN).
3. Launch a web browser from a computer or mobile device that is connected to the
router network.
4. Enter http://www.routerlogin.net.
A login window opens.
5. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
6. Select ADVANCED > USB Storage > ReadySHARE > ReadyCLOUD.
The ReadyCLOUD page displays.
7. Enter your ReadyCLOUD user name and password and click the Register button.
If you did not yet create a ReadyCLOUD account, see Create a ReadyCLOUD account
on page 124.
The router is registered with ReadyCLOUD.
Note: If the router's Internet connection mode is set to Dial on Demand, the router
automatically changes the connection mode to Always On. This change is required
for ReadyCLOUD to remotely access the USB storage device.
8. After registration, visit readycloud.netgear.com.
9. Click the Sign In link, enter your ReadyCLOUD user name and password, and click
the Sign In button.
The ReadyCLOUD page displays the router that you registered and the contents of
the USB storage device that is connected to the router.
Use Dynamic DNS to Access USB
Storage Devices Through the
Internet
125 User Manual