Epson PowerLite 1220 User Manual page 86

note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.
Maintaining the Projector
86
4. Loosen the two screws holding the lamp in place (you can't
remove them).
5. Hold the lamp as shown and pull it straight out.
6. Gently insert the new lamp. (If it doesn't fit easily, make sure it is
facing the right way.) Then tighten its screws.
Loosen, but don't
remove these screws