Mounting On A Table - LG 42LA6600 Owner's Manual

Mounting on a table

1
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources
y y
of heat, as this may result in fire or other
damage.
Adjusting the angle of the TV to suit view
Swivel 15 degrees to the left or right and adjust
the angle of the TV to suit your view.
15˚
10 cm
1 0 c m
10 cm
15˚
ASSEMBLING AND PREPARING
NOTE
When adjusting the angle of the TV, watch
y y
out for your fingers.
» Personal injury may occur if hands or fingers
y
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
Front
Securing the TV to a table
(For 42/47LA6600, 42/47LA660T
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
1
Connect the Desk-mount Cables to the
Stand Base using the Bracket Screws.
2
Fix the Desk-mount Cables to a table using
the Desk-mount Screws.
3
Once the TV is fixed, move the table close to
the wall. Children may go in, causing injuries.

(For 42LA****)
M4 X 8
2 EA
WARNING
To prevent TV from falling over, the TV
y y
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
Rear
)
2 EA
(For 47LA****)
P4 X 8
2 EA
15