Table of Contents
Advertisement
en Cleaning and servicing
Take the drain hose out of the
6.
holder.
7.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
Do not touch the hot detergent
▶
solution.
To allow the detergent solution to
flow out into the container, remove
the sealing cap.
Firmly press on the sealing cap.
8.
44
Insert the drain hose into the
9.
holder.
Cleaning the drain pump
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.
Requirement: The drain pump is
empty.
Since water may remain in the
1.
drain pump, unscrew the pump
cap carefully.
The filter insert in the pump
‒
housing may become stuck due
to coarse particles of dirt.
Loosen the dirt and remove the
filter insert.
Advertisement
Table of Contents
