How To Clean The Gauze Strainer Of The Fuel Lift Pump - Perkins 4.236 Series User Handbook Manual

4
4.236 Series

How to clean the gauze strainer of the fuel lift pump

1 Remove the cover and joint (A1) from the top of the fuel lift pump (A2) and remove the gauze strainer (A3).
2 Carefully wash all the sediment from the lift pump body.
3 Clean the gauze strainer, joint and cover.
4 Assemble the lift pump. Use a good joint and ensure that the lift pump body and the cover are fitted together
correctly because leakage at this point will let air into the fuel system.
5 Eliminate the air from the fuel system through the filter vent point, see "How to eliminate air from the fuel
system" on page 29.
User's Handbook, TPD 1291E, Issue 2 25
This document has been printed from SPI². Not for Resale