Table of Contents
Advertisement
6.2
K1700 & K2300 Assembly of removable parts
After the installation, the stove should be fitted with the removable covers.
- Top front cover
To install the top front cover, place it over the stove (Figure-8a) and then tighten the screws that secure it to the top panel of
the stove (Figure 8b).
- Bottom front cover
The bottom front cover can be assembled by removing the screws located on the bottom part of the stove. Then place the part in
the appropriate position (Figure 9-a) and replace and tighten the screws again (Figure 9-b)
- Side covers
To install the stove's side covers position the covers and insert them as illustrated, onto the existing supports.
15a
Figure 15 – Assembly of the top front cover
16a
Figure 16 – Assembly of the bottom front cover
Figure 17 – Assembly of side covers
15b
16b
Advertisement
Table of Contents
