Samsung HT-H4530R User Manual page 13

HT-H4530R
(L) (R)
FRONT STAND
HT-H4550R
(L) (R) (L) (R)
FRONT / SURROUND
Installing the Speakers on the Tallboy Stand
* HT-H4530R only - Front Speakers
* HT-H4550R only - Front/Surround Speakers
1. Turn the Stand Base upside-down and connect it to the Stand.
2. Use the driver to combine the screws on the 3 marked holes.
Straighten a supplied speaker wire to the gravity direction and put
3.
in the hole on the centre of Stand Base.
Connect the upper Speaker to the assembled Stand.
4.
5. Insert a screw clockwise into the hole on the rear of the speaker
using a screwdriver.
And then connect a speaker cable.
This is the appearance after the speaker is installed.
6.
Follow this steps to install other speaker.
(L) (R)
SCREW (5x15): 8EA STAND BASE
SURROUND
SPEAKER CABLE
SPEAKER CABLE
STAND STAND BASE
CENTRE
SCREW (5x15): 16EA
CENTRE
Stand Base
1
Stand
3
Speaker
5
SUBWOOFER
SUBWOOFER
2
4
Stand
6
13
|
English