Creating A Custom Preset And Printing - Epson Stylus Pro 3880 User Manual

56 | Printing with Epson Drivers for Macintosh
Note: If you check the
settings on each screen
in the drop-down menu,
go through them carefully
from top to bottom.
Avoid cycling through
them repeatedly, or you
may lose your settings.
Caution: Do not open
and close the Presets
menu without typing a
name, or you will lose
your settings.
adjusts the difference between the light and dark areas of
• Contrast
your image.
• Shadow Tonality
tonality only in the shadow or highlight areas of your image.
• Max Optical Density
print. Create a soft focus print by setting the density lower.
• Highlight Point Shift
density to the highlights of your image.
The tone color circle adjusts the hue of your black and white print.
•
Click on any portion of the color wheel or enter corresponding
values to customize the tone (hue) added to your print. The closer
you select to the edge of the wheel, the more color you add.
The preview image approximates the image tone based on your settings.
Note that this preview always shows the same image and is not color
managed. It provides a level of feedback as you make changes.

Creating a Custom Preset and Printing

Once you've made the correct settings for your print job, create a
custom preset. This will save you time when you use the same
profile/printer/ink/media combination for future print jobs.
1. Select
Summary
2. After verifying that your settings are correct, select
drop-down menu.
Presets
3. Type a name for your custom preset and click
4. When you're ready to print, click the
3-56
and
Highlight Tonality
adjusts the overall density or focus of the
helps to reduce gloss differential by adding
from the drop-down menu.
Print
allow you to control
from the
Save As
.
OK
button.