1: Tools Required; 2: Getting Started - Schwinn Hybrid Owner's Manual

1: TOOLS REQUIRED

• Phillips head screw driver (minimum four inch shaft)
• 4 mm, 5 mm, 6 mm 8 mm and 17 mm Allen wrench
• Adjustable wrench or a 9 mm, 10 mm, 14 mm and 15 mm open
and box end wrenches
• A pair of pliers with cable cutting ability
• Needle nose pliers with cable cutting ability
• Grease (Automotive or anti-slip copper grease)

2: GETTING STARTED

❶ Open the carton from the top and remove the bicycle parts.
❷ Remove the straps and protective packaging from the bicycle.
Important! Do not discard packing materials until assembly
is complete to ensure that no required parts are accidentally
discarded.
❸ Inspect the bicycle and all accessories and parts for possible
shortages. It is recommended that the threads and all moving
parts in the parts package be lubricated prior to installation.
Note: We recommend using a lithium based grease on the
parts before assembly.
Figure 3.1
Assembly 3
23