Assistance - Hotpoint AQD970D49 Instructions For Installation And Use Manual

Assistance

Before calling for Assistance:
EN
• Check whether you can solve the problem by yourself (see "Trouble shooting");
• Restart the wash cycle to check whether the problem has been solved;
• If it has not, contact the Authorised Technical Assistance Service.
! If the Washer-dryer has been installed or used incorrectly, you will have to pay for the call-out service.
! Always request the assistance of authorised technicians.
Please have the following information to hand:
• the type of problem;
• the appliance model (Mod.);
• the serial number (S/N).
The above information can be found on the data plate located on the appliance itself.
!
Note: to exit "Demo mode", switch machine off, press and hold the two "START/PAUSE"
simultaneously for 3 seconds.
12
and "ON/OFF" buttons