Speco D8HU User Manual page 16

① Select EZ Record for Date/Time and Recording Setup, and click "next" to proceed.
② When the description of EZ Record Setup is displayed, click "next" to proceed.
③ Set up the Date/Time settings and click "next" to get to the recording setup.
④ Select the recording mode and click "next" to get to the record video quality setup.
⑤ After setup the Record Video Quality, click "next" to to proceed.
⑥ To close the setup page click "finish" or "go to ez camera" to set up IP Camera.
⑦ Configure individual cameras in the EZ Camera Setup.

Select the Channel to configure.

Select the Camera Protocol, and then click "select" on Scan menu. (This will scan the
network for any IP cameras using the specified protocol.)

Select the desired IP camera from the list, and then click on "register".

If necessary, click on "Preview" to preview the camera, or Setup to change camera settings.
2.4.2. EZ Network (Using an internet connection)
7
Figure 2.4.1. EZ Record Setup Procedure
1
16
3
8
2