Table of Contents
Advertisement
All manuals and user guides at all-guides.com
L-2 SELECT/INPUT Setting
The A
V2 (L-2) IN/DECODER
video signal) or a Y/C signal (a signal in which the luminance and chrominance
signals are separated). Set
type of unit connected to the rear panel A
VCR. Set
to the appropriate mode depending on the output signals of
L-2 INPUT
the connected unit.
get to the output/input set screen
using the A and B buttons and press
OUTPUT/INPUT SET
Move the highlight bar to
select mode
or
using the A and B
SELECT
L-2 INPUT
buttons. Press
(or E) to select the
desired mode:
FOR L-2 SELECT
•
: To use this VCR as the re-
A/V
corder with the player con-
nected to the A
DECODER
the satellite receiver connected
to the A
connector.
: To use a decoder connected to the AV2 (L-2) IN/DECODER
•
DECODER
connector.
•
: To view a satellite programme with the TV set while the VCR is
SAT
turned off. (
FOR L-2 INPUT
•
: If a connected device's output is compatible only with regular video
VIDEO
signals, set to
•
: If a connected device's output is compatible with Y/C signals, set to
S-VIDEO
. This setting will let you take advantage of higher-quality
S-VIDEO
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
return to normal screen
NOTES:
• If you have a satellite receiver or a decoder connected to the A
connector, be sure to set
DECODER
editing.
• If you're not connecting a satellite receiver or a decoder to the A
connector, leave
DECODER
• The default setting is
power cut or because the AC was removed from the VCR,
matically selected when the power is restored to the VCR. If you are using a
satellite receiver or a decoder, be sure to set
mode.
• When
is set to
L-2 SELECT
on the display panel instead of 'L2'.
• If
is set to
L-2 SELECT
• If
L-1 OUTPUT
is set to
connector accepts either a composite signal (regular
to the appropriate mode depending on the
L-2 SELECT
V2 (L-2) IN/DECODER
Press m. Move the highlight bar to
L-2
V2 (L-2) IN/
connector, or to use
V2 (L-2) IN/DECODER
pg. 48)
VIDEO
.
Press m.
L-2 SELECT
set to
L-2 SELECT
A/V
; if the VCR's memory backup has expired due to a
A/V
L-2 SELECT
, 'SAT' appears on TV screen instead of 'L-2', or
SAT
, it is impossible to set
DECODER
S-VIDEO
, it is impossible to set
advanced features
connector of this
(or E).
OUTPUT/INPUT SET
L-1 OUTPUT
VIDEO
L-1 INPUT
VIDEO
F
L-2 SELECT
A/V
L-2 INPUT
VIDEO
[1] a k
[MENU]: EXIT
V2 (L-2) IN/
back to appropriate mode after
V2 (L-2) IN/
.
will be auto-
A/V
back to appropriate
to
L-2 INPUT
S-VIDEO
L-2 SELECT
to
DECODER
51
.
.
Advertisement
Chapters
Table of Contents
