If The Roll Paper Jams Or Feeds Incorrectly - Epson Stylus Photo 1280 Printer Basics Manual

9. Gently hold the paper in place as you press and release the z roll paper button to
feed the paper into the printer.
Note: Don't force the paper to feed into the printer. Allow the paper to move
automatically.
Make sure to press the z roll paper button when you feed roll paper. Pressing the
maintenance button by mistake may cause paper feeding problems.

If the Roll Paper Jams or Feeds Incorrectly

If the paper feeds incorrectly, do the following:
1. Press the z roll paper button for three seconds to rewind the paper. (You may
have to do this more than once to rewind the paper completely.)
If the paper is jammed and won't rewind, turn the printer off. Then cut the roll at
a point a few inches away from where it exits the printer. Make your cut as
straight as possible to avoid further feeding problems. Gently pull the roll
backward to rewind it, and then turn the printer on again.
2. After you rewind the paper, the b maintenance light comes on. Press the
b maintenance button to turn the light off.
3. Reload the paper, making sure the end is straight and not damaged. If necessary,
trim the end again before reloading.
b
13