Product-Specific Safety Instructions; Personal Protective Equipment - Bosch rexroth PSM Instruction Manual

Spool position sensor
Table of Contents

Advertisement

10/24
PSM | Safety instructions
Bosch Rexroth AG, RE 95190-B/2021-08-12
2�6 Product-specific safety instructions
The following safety instructions apply to chapters 6 to 14.
System/machine under pressure!
Risk of death or serious injury when working on unsecured machines/systems!
Property damage!
▶ Switch off the relevant machine/system part and secure it against reactivation
according to the parameters by the machine/system manufacturer.
▶ Ensure that all relevant components of the hydraulic system are depressurized.
For this purpose, observe the parameters indicated by the machine/system
manufacturer.
▶ Please note that the hydraulic system might still be pressurized even after
separation from the actual pressure supply.
▶ Do not disconnect any line connections, ports or components as long as the
hydraulic system is under pressure.
Improper cable and line routing!
Risk of stumbling and property damage! Improper routing of cables and lines
can cause a risk of stumbling as well as damage to equipment and components,
e.g. due to lines and connectors being torn off.
▶ Always install cables and lines in a way that nobody can fall over them,
that they are not bend or twisted, do not chafe on edges and are not guided
through ducts with sharp edges without sufficient protection.
Danger due to malfunctions!
Risk of injury and property damage as well as machine damage due to
malfunctions of the sensor!
▶ Carry out a risk assessment of your machine and determine the possible
safety-relevant functions.
▶ Make sure that the expected position signal is provided with the correct value.
▶ Before operation, check whether the spool position is correctly detected.
▶ Take suitable measures to ensure safety in applications relevant to safety,
e.g. sensor redundancy, plausibility check, emergency switch, etc.
▶ Please consult Bosch Rexroth if you require product data for a safety
assessment of the machine.
2�7 Personal protective equipment
The personal protective equipment is the responsibility of the user of the product.
Observe the safety regulations in your country.
All pieces of personal protective equipment should be intact.
WARNING
CAUTION

Advertisement

Table of Contents
loading

Table of Contents