Removing A Printed Banner - Epson Stylus Color 1520 User Manual

Printing on Special Media
Note:
Some applications may
allow you to print banners
longer than 44 inches;
see your application
program documentation
for details.
6. Type a name for your custom-size paper in the
box. Then type your paper's width in the
Size
and a length of up to
for banners using either landscape or portrait orientation.)
Click .
OK
7. Choose
Portrait
orientation of the banner or document you created. Set the
printable area if necessary.
8. Click .
OK
9. Choose from the File menu or click the print icon in
Print
your application. You see the printer settings dialog box (as
shown on page 1-9).
10. Choose the
Media Type
paper or canvas cloth as described in the table on page 3-3.
(For continuous computer paper, choose
11. Check the rest of the printer software settings as described
in Chapters 1 and 2. Then click
12. When it's finished printing, follow the steps in the next
section to remove your banner from the printer. To remove
continuous paper, see page 3-18.

Removing a Printed Banner

Follow these steps to remove a printed banner using the cutting
guide:
1. Lower the banner paper cutting guide over the top of the
paper.
2. If you turned auto tear-off mode on (as instructed in step 1
on page 3-22), the printer automatically feeds the paper to
the tear-off position when it's finished printing. If you
didn't turn on auto tear-off mode, press the
to advance the paper to the tear-off position.
3-30
inches for the
44
or , depending on the
Landscape
setting that matches your banner
Print
New Paper
field
Width
. (This works
Height
.)
Plain Paper
to print your banner.
button
LF/FF