Miele TWR 780 WP Operating Instructions Manual page 26

Before using for the first time
Setting up Miele@home

Set up "Miele@home"?
Skip
 To set up Miele@home now: touch
the Continue sensor control.
Tip: To postpone setup until later: touch
the Skip sensor control. The following
message will then appear in the display:

It is possible to set up later in "Settings" /
"Miele@home".
Confirm with the

Via WPS
 Select the connection method you
wish to use.
You will then be guided by the display
and the Miele app.
You will require a WPS-compatible
router for the Via WPS connection type.
 Activate the WPS function on your
router within 2 minutes.
Setting the clock format
The time of day can be displayed as a
24 hour or 12 hour clock.
26
sensor control.
OK
 Select the clock format you want and
confirm this with the
The display will change to the next set-
ting.
Setting the time of day
This message only appears if the
tumble dryer has not yet been con-
nected to a WiFi network.
Continue
The time of day is set automatically if
connection is established with a WiFi
network.
 Clock display
 Place your finger on the number that
you want to change and move your
finger in the direction you want.
 Confirm with the
Via App
The display shows further information.
OK sensor.
14 02
13 01
12 00
11 59
10 58
OK sensor.
OK