Table of Contents
Advertisement
Vax V-112 Range User Guide.qxd:V-112 Range User Guide
9. Troubleshooting
WARNING: To reduce the risk of personal injury,
!
unplug the vacuum cleaner before performing
maintenance or troubleshooting checks.
PROBLEM: Vacuum cleaner won't run
Cause:
Not properly plugged into electrical outlet.
Solution: Plug in securely.
Cause:
No electricity in the electrical outlet.
Solution: Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution: Push on/off switch to 'on' .
Cause:
Motor thermostat has tripped.
Solution: Switch off and unplug the vacuum cleaner.
Leave for one (1) hour before switching the
vacuum cleaner back on.
Cause:
Blown fuse/tripped breaker.
Solution: Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won't pick up/loss of suction.
Cause:
Dirt container not installed properly.
Solution: Review dirt container replacement.
Cause:
Dirt container full or blocked.
Solution: Empty dirt container.
Cause:
Clogged filters.
Solution: Remove, clean and replace filters.
PROBLEM: Accessories won't pick up.
Cause:
Accessories are not attached correctly.
Solution: Refer to section 5.
Cause:
TurboBrush / TurboTool (Model: V-112P,
V112A only) is clogged.
Solution: Refer to section 7.
Cause:
Hose / Stretch Hose (Model: V-112P only) is
not installed correctly.
Solution: Refer to section 7.
All manuals and user guides at all-guides.com
2/10/08
13:07
PROBLEM: Dust escaping from the vacuum cleaner.
Cause:
Dirt container full.
Solution: Empty dirt container.
Cause:
Dirt container not installed correctly.
Solution: Review dirt container replacement.
Cause:
Hose / Stretch Hose (Model: V-112P only) is
not installed correctly.
Solution: Review installation.
Cause:
Filter not installed completely.
Solution: Remove, clean and replace filters.
Page 9
Vax Careline
0870 606 1248
9
troubleshooting
Advertisement
Table of Contents
