Connections; Tv Connections - LG segang LH-W751TA Owner's Manual

Wireless dvd receiver system
Hide thumbs Also See for segang LH-W751TA:
Table of Contents

Advertisement

Connections

TV Connections

Make one of the following connections, depending on
the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD Receiver. Use one of the connection
methods described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
Make sure the DVD/CD Receiver is connected directly
to the TV. Select the correct AV input on your TV.
Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD/CD
Receiver to the S-VIDEO IN jack on the TV using the
S-Video cable (S).
Video connection
Connect the MONITOR OUT jack from the DVD/CD
Receiver to the VIDEO IN jack on the TV using the
video cable supplied (V).
Component Video (Color Stream
Connect the COMPONENT VIDEO OUT jacks from the
DVD/CD Receiver to the corresponding in jacks on the
TV using an Y Pb Pr cable (C).
8
Progressive Scan (ColorStream
connection
If your television is a high-definition or "digital ready"
television, you may take advantage of the DVD/CD
Receiver's progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD Receiver.
Connect the COMPONENT VIDEO OUT jacks from the
DVD/CD Receiver to the corresponding in jacks on the
TV using an optional Y Pb Pr cable (C).
Rear of TV
S-VIDEO
INPUT
®
) connection
Rear of DVD/CD Receiver
otes
Set the Progressive to "On" on the Setup menu for
progressive signal, see page 17.
Set the progressive to "Off" by removing any disc
from the unit and close the disc tray. see that "no
disc" is displayed on the display window. Then, press
STOP and hold it for five seconds before releasing it.
Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack) or
S-VIDEO connection.
VIDEO
COMPONENT VIDEO /
INPUT
PROGRESSIVE SCAN INPUT
Y
Pb
Pr
L
V
S
C
L
AUDIO
R
AV2 IN
AV1 IN
®
pro)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents