Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load the prerecorded tape into tape
deck 1 with full spool to the left and a
blank tape into tape deck 2 with full
spool aside.
3 Press í or ë to select the recording
tape side (see Tape Side under TAPE
section) .
4 Press DUB (HSD) once for normal
speed dubbing or twice (within 2
seconds) for high speed dubbing.
™ "NORMAL" (normal speed) or
"FAST" (high speed) will be
displayed, followed by "DUB" with
"< or >" scrolling left or right
depending on the tape side selected.
™ The
appears on the display
HSD
during high speed dubbing.
• Dubbing will start immediately.
™ The
starts flashing.
REC
5 Press Ç to stop dubbing.
Notes:
– Only å å å å å mode is available during
dubbing.
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
Untitled-5
21
– During high speed dubbing in Tape
Recording the mixed sound /
mode, the sound is reduced to a low
One Touch Recording
volume.
• During microphone mixing, you can
– You can listen to another source while
record the mixed sound on a tape in
dubbing.
tape deck 2 except dubbing mode.
• For One Touch Recording, as soon as you
CD Synchro Start Recording
press REC, the current source (CD,
1 Load a blank tape into tape deck 2 and a
TUNER or AUX) will be recorded on tape
disc into a disc tray.
deck 2.
2 Press CD to select CD mode.
1 Load a blank tape in tape deck 2.
• You can program the tracks in the order
2 Press REC to start recording.
you want them to be recorded (see
™ The
Programming Tracks). If not, select the
3 Press Ç to stop recording.
disc by pressing CD (CD 1•2•3) and the
tracks are recorded according to the
Note:
order on the selected disc.
– When you press RECORD while in TAPE
3 Press REC to start recording.
mode, " SELECT SOURCE " will be
™ The
starts flashing.
REC
displayed. One Touch Recording is not
• CD will start playback automatically.
possible in TAPE mode.
4 Press Ç to stop recording.
Digital Recording via Digital
Out
For CD digital recording, please refer to the
Instructions Manual of the CD Recorder,
digital audio equipment, etc.
starts flashing.
REC
6/8/01, 10:26 AM
RECORDING
21
3139 116 19751
Advertisement
Table of Contents
