Samsung AQV12NSA Service Manual page 25

Disassembly and Reassembly
No Parts
3 Fan 1) Release the refrigerant at first.
& 2) Loosen fixing screw(CW). (Use Monkey
Motor Spanner.)
3) Disassemble the pipes in both inlet and outlet
with welding torch.
4) Detach the Heat Exchanger.
4 Heat Exchanger 1) Loosen 2 fixing screws(CCW) on both sides.
(Use +Screw Driver.)
2) Disassemble the pipes in both inlet and outlet
with welding torch.
3) Detach the Heat Exchanger.
5 Ass'y Valve 4-Way 1) Loosen 4 bolts(CCW) fixed to assemble Valve
& Service with Bracket Valve like the picture on
Ass'y Valve EEV the right side. (Use Monkey Spanner.)
2) Disassemble the pipes assembled the suction
and discharge sides of the Compressor with
welding torch.
6 Compressor 1) Loosen the Nut(CCW) of Terminal Cover. (Use
Monkey Spanner.)
2) Detach the Terminal Cover and detach the
Connect Comp Wire from Compressor.
3) Disassemble the Felt Comp Sound.
4) Loosen the 3 bolts(CCW) at the bottom of
Compressor like the picture on the right side.
(Use Monkey Spanner.)
4-8
All manuals and user guides at all-guides.com
Procedure
Before you disassemble the pipes and
Condenser, be sure that there should be no
refrigerant remained in the unit.
Remark
Samsung Electronics