Get Started; Power Supply; Turn On - Philips BT4080 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Power supply

The Bluetooth speaker can be powered by
either AC mains or built-in battery.
Option 1: AC power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
Connect the power adapter to:
• the DC IN socket on the speaker.
• the wall outlet.
DC IN
Option 2: Battery power
The speaker can operate on the built-in
rechargeable battery.
Note
•
Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
•
It takes approximately 6 hours to fully charge the
battery.
•
When battery is low or under charging, the LED
indicator flashes red.
To recharge the built-in battery:
Connect the speaker to AC power supply.

Turn on

Press to turn the speaker on.
» The LED indicator flashes blue.
Note
•
If battery is low, the LED indicator flashes red.
Turn off
Press again to turn the speaker off.
Note
•
If the connection with Bluetooth devices or other
external devices is invalid for 15 minutes, the speaker
switches to standby mode automatically for power
saving.
EN 5