Page 1
Secure the stack under all five tabs on the cassette. Note: If the printer runs out of paper while printing, reload the paper cassette, install it, and press the FORM FEED button to continue printing. 4. Once you’ve loaded paper, you can print with the printer upright or flat.
Page 2
Caution: Turn on the printer before you load a sheet into the manual insertion slot, or it may eject the page and print on the platen. Turn on the printer and place it upright. Lower the back flap and insert a single sheet of paper...
Page 3
You can print a self test to make sure your printer operates properly. 1. Make sure the printer is turned off and paper is loaded. 2. Hold down the FORM FEED button while you turn on the printer. It loads a sheet of paper automatically and begins to print characters in the current font and character table.
Page 4
All new settings remain in effect until you change them again. Note: 5. Turn off the printer at any time to exit the default settings mode; then replace the narrow cover. You can change the printer settings listed here:...
Page 5
Caution: If you just used the printer, let the print head cool for a few minutes before you touch it. 1. Move the print head to the center of the printer. Grasp the sides of the ribbon cartridge and lift it out of the printer.
Page 6
If you purchased your Epson product in the United States, Epson America provides local customer support and service through a nationwide network of authorized Epson dealers and Service Centers Epson also provides the following support services through the Epson Consumer Resource Center at (800) 92243911:...