Pressure Sensor; Charging And Battery Status - Philips Colgate SonicPro 70 Manual

16
English
Note: Your tootbrush comes with the brush head replacement reminder
activated. To deactivate this feature, see 'Activating or deactivating
features'.

Pressure sensor

Your SonicPro measures the pressure you apply while brushing to protect
your gums and teeth from damage.
If you apply too much pressure, the handle changes its vibration until you
reduce the pressure.
Note: Your toothbrush comes with pressure sensor activated. To
deactivate this feature, see 'Activating or deactivating features'.
BrushPacer
The BrushPacer features indicates when you are supposed to move onto
the next section of your teeth via a brief change in vibration.
The toothbrush turns off automatically at the end of the brushing session.

Charging and battery status

Charging on the charger
Plug the charger into an electrical outlet.
1
2 Place the handle on the charger.
- When fully charged, all battery indicator lights light up green.
Note: Your handle comes pre-charged for first use. After first use, charge
for at least 24 hours.
Charging with the travel case
Note: Only the following SonicPro handles can be charged in the charging
travel case: HX972G, HX972K, HX972V, HX972P, HX962C. The HX number
can be found on the bottom of your handle.