Restoring Slides Or Negatives; Restoring 4 × 6 Photos - Epson Stylus Photo RX700 Product Information

Epson Stylus Photo RX700
Note:
Borderless printing is available only for Epson photo papers in
these sizes: 4 × 6-inch, 5 × 7-inch, 8 × 10-inch, and letter-size.
Whether you print with or without borders, your photos will be
slightly cropped because 35-mm film has different proportions
than those of the paper you're printing on.
6. If you would like change the print quality or color
saturation, press the
Options
as needed, then press
OK
7. Select the film type you've loaded. If you're scanning slides,
select . If you're scanning a film strip, select one
Color slide
of these options:
❏
Color negative film
❏
B&W negative
❏
Positive color film (strip)
Press after making your selection.
OK
The RX700 scans your photos and displays the first one on
its screen:
8. Use the l and r arrow buttons to preview each of your
photos.
9. While a photo is displayed, use the
how many copies of it you'd like.
10. When done selecting all your photos for printing, press
11. On the preview screen, confirm your selected photos and
settings, then press the x
Epson Stylus Photo RX700
10 -
button. Change any settings
.
(used in most cases)
and buttons to select
+ –
button to begin printing.
Color
Restoring Color
You can use Color Restoration to restore the color of images
on slides, negatives, or 4 × 6-inch photos that have become
faded over time.
Note:
You can also restore color to photos as large as letter size when you
scan them from your computer. See your electronic Reference Guide
for details.

Restoring Slides or Negatives

To restore color from faded
slides or negatives, follow
the instructions on page 8
to place your film on the
scanner and adjust the
settings for the type of
paper you've loaded.
Before printing, make sure
is set to
Restoration
Restoring 4 × 6 Photos
Follow these steps to restore faded 4 × 6-inch photos. You can
place two photos on the scanner at once; a separate print will
be made of each photo. Before starting, you'll need to have
some Epson Premium Glossy Photo Paper in one of these
sizes: 4 × 6-inch, 5 × 7-inch, 8 × 10-inch, or letter-size.
1. Press the
Creative Projects
2. Select
Reprint/Restore Photos
3. Place one or two photos on the scanner glass. Align them
with the edges of the glass, and make sure they're separated
by at least 1/2 inch. Then press
.
OK
Note:
If the edges of your photos are important, slide them about 1/8
inch away from the edges of the glass to ensure that the entire
photo is copied.
5/05
, as shown.
On
button.
then press
OK
.
OK
.