Memory Card Print Settings - Epson Stylus NX510 Series Quick Manual

6. To adjust the amount of image expansion when printing borderless photos,
press and adjust the
Menu
press .
OK
7. Press , then press x
OK
printing finishes before printing from any additional index sheets.
To cancel printing, press

Memory Card Print Settings

Press the button to change settings. When you're done, press
Menu
■
To change the paper type, select
you loaded (see page 13).
■
To change the paper size, select
loaded.
Note:
Paper Size options depend on the Paper Type you choose.
■
To change the layout, select
margin around the image or select
way to the edge of the paper (slight cropping may occur).
■
To change the print quality, select
.
Draft
Note:
You can only adjust the Quality setting when you select Plain Paper as your Paper
Type setting. Otherwise, the setting will be Standard.
■
To print the date on your photos and select the format for it, select
choose the format you want.
■
To improve print quality, select
faster print speed).
■
To adjust the amount of image expansion when printing borderless photos,
select
Expansion
Note:
You may see white borders on your printed photo if you use the Minimum setting.
20
Printing From a Memory Card
setting (see below). When you're done,
Expansion
to start scanning and printing. Wait until
Start
y Stop/Clear Settings
Paper Type
Paper Size
and choose
Layout
Borderless
Quality
Bidirectional
and choose ,
Standard
.
OK
and choose the type of paper
and choose the size of paper you
to leave a small
With Border
to expand the image all the
and choose
Standard
and choose (choose
Off
, or
Medium Minimum
.
, , or
Best
and
Date
for
On
.