Link Config - Contec CONPROSYS Series Setup Manual

2. Link config

Set connection method to link PLC and the product.
Configurable contents differ depending on the communication method.
1
From the [PLC] in CONPROSYS WEB Setting, click the [Add Link] to open the setting page in
the bottom.
2
Enter setting items 1-8 listed below.
Settings
No. Setting
1 Link Name
2 Maker
3 Communication
Method
4 Format
5 Frame
6 Link Type
7 IP Address
8 Port Number
—
Connecting with PLC and CODESYS
Setup Manual Integrated Type
An arbitrary name for PLC and the product connection.
0 to 32 of one-byte alphanumeric letters, [_] underline, and [-] hyphen.
The name cannot be set with only numbers. (e.g.: Link1)
Select a maker name of PLC from the list
Select Ethernet or Serial in accordance with the used PLC.
Select a format from the list in accordance with the used PLC.
Select a frame from the list in accordance with the used PLC.
The link types correspond to selected maker name, communication method,
format and frame are allocated automatically and the file name is displayed.
[Ethernet connection]
Enter IP address of PLC. (e.g.: 10.1.1.102)
[Ethernet connection]
Enter the port number of PLC. (e.g.: 8080)
— 57 —
—
Description