Setup Mode - Epson Stylus CX8300 Series Operation Manual

Menu Setting Item
Paper Type Prem. Glossy, Ultra
Glossy, Photo Paper,
Matte
Paper Size 10 x 15 cm, 13 x 18 cm,
A4
Layout Borderless
With Border
Quality Standard
Expansion Standard, Mid., Min.

Setup Mode

Ink Levels
Maintenance
PictBridge Setup
Restore Default Settings
Description
-
-
Copies your photo all the way to the edges of the paper.
Note:
Your image is slightly enlarged and cropped to fill the
sheet of paper. Print quality may decline in the top and
bottom areas of the printout, or the area may be smeared
when printing.
Copies your original with a standard 3-mm margin.
-
Select the amount the image is expanded when you
select Borderless.
Standard: The image is slightly enlarged and cropped to
fill the sheet of paper.
Mid.: Margins might be printed. (Low expansion rate.)
Min.: Margins might be printed. (Lowest expansion rate.)
Check the ink cartridge status.
Nozzle Check
Head Cleaning
LCD Brightness
Head Alignment
Change Ink Cartridge
Language
Display Format
Set the print settings when printing with a PictBridge device.
Reset the LCD panel settings to the factory default settings.
Print a nozzle check pattern to check the
condition of the print head.
Clean the print head to improve the condition of
the print head.
-10 to +10
Adjust the alignment of the print head.
Change ink cartridges before they are expended.
English, French, German, Italian, Spanish,
Portuguese, Dutch, Russian
1up with Info, 1up without Info, 9up
Summary of Panel Settings
27