Table of Contents
Advertisement
12. Press the keys on the numeric keypad to enter the time in a
12-hour format. You can enter the numbers 0 to 9.
13. Press the x
Start Color/OK
button. You see this display:
14. Press the
key on the numeric keypad to select
1
key to select
.
PM
15. Press the x
Start Color/OK
display.
2.Date/Time
16. If you want to print your fax
number in the fax header, press
the u or d button, or press the
key on the numeric keypad,
3
to display this option:
17. Press the x
Start Color/OK
except for the cursor (_).
18. Press the keys on the numeric keypad to enter your fax
number. You can enter the numbers 0 to 9, and the
characters * and #, up to 20 digits total.
19. Press the x
Start Color/OK
20. Press the y
Cancel/Back
screen displaying the date.
Selecting the Paper Size
Before you receive a fax, be sure to load plain paper and set the
setting to the size of paper you've loaded. Also
Paper Size
make sure the
Automatic Reduction
faxes in the desired size (see the next section for details).
Selecting Send/Receive Settings
Your CX7000F Series is set up to send and receive faxes using
the default settings below. For more information about these
and other fax settings, see the User's Guide.
Setting and Options
Paper Size
Letter (8.5 × 11; default)
Legal (8.5 × 14)
A4 (8.3 × 11.7)
Automatic Reduction
On (default)
Off
Last Transmission Report
Off
On Error (default)
On Send
Dial Mode
Tone (default)
Pulse
1:AM 2:PM
AM
button. You return to the
3.Your Phone Num
button. The display goes blank
button.
button until you return to the
setting is set to receive
Description
Indicates the size of the paper loaded in
the CX7000F Series for printing received
faxes.
Indicates whether large received faxes
are reduced in size to fit on the selected
Paper Size or printed at their original size
on multiple sheets.
Indicates whether or when the CX7000F
Series prints a report for outgoing faxes.
Select Off to turn off report printing, On
Error to print reports only when an error
occurs, or On Send to print reports for
every fax you send.
Indicates the type of phone system to
which you've connected the CX7000F
Series.
Setting and Options
DRD
All (default)
Single
Double
Triple
or the
2
Double & Triple
ECM
On (default)
Off
V.34
On (default)
Off
Rings to Answer
5 (default)
1, 2, 3, 4, 5, 6, 7, 8, or 9
To change the fax settings listed above, follow these steps:
1. Press the
enter Fax mode. The
button lights up and you see
this display:
2. Press the
see this display:
3. If you need to change the
Paper Size
Reduction
Transmission Report
settings, press the u or d
button, or press the
the numeric keypad, to display
this option:
4. Press the x
button. You see this display:
5. Press the u or d button, or press the
numeric keypad, to display one of these options:
❏ 3.Paper Size
❏ 4.Automatic Reduction
❏ 5.Last Transmission Report
Then press the x
6. Press the u or d button until the setting option you want is
displayed, then press the x
select it.
7. Repeat steps 5 and 6 to change any other settings. When
you're finished, press the y
to the
4.Scan & Print Setup
10/06
Epson Stylus CX7000F Series
Description
Indicates the type of answer ring pattern
you want to use to receive faxes. You
must have set up your phone system to
use different ring patterns to select an
option other than All.
Indicates whether you use Error
Correction Mode to automatically
request retransmission of fax data that is
received with detected errors.
Indicates the speed at which you
transmit faxes.
On is 33.6 Kbps and Off 14.4 Kbps.
Indicates the number of rings that must
occur before the CX7000F Series
automatically receives a fax.
button once to
Fax
Fax
Enter Fax Number
button. You
Setup
1.Select Speed D
,
Automatic
, or
Last
key on
4
4.Scan & Print S
Start Color/OK
1.Resolution
button.
Start Color/OK
Start Color/OK
Cancel/Back
menu.
,
, or
key on the
3
4
5
button to
button to return
11
Advertisement
Table of Contents
