Advertisement
Quick Links
Commercial Camera System
(IR Camera & 5.6" Monitor)
Features
•
5.6" High Resolution LCD Monitor
•
Built in Speaker
•
Two video inputs
•
Fully Adjustable
•
Auto brightness adjustment
•
Commercial camera with Infra Red Capability and Built in
Microphone using Sony CCD technology.
•
12v or 24v power.
Model: CCS562
Installation Manual
Advertisement
Related Manuals for Advent CCS562
Summary of Contents for Advent CCS562
- Page 1 5.6” High Resolution LCD Monitor • Built in Speaker • Two video inputs • Fully Adjustable • Auto brightness adjustment • Commercial camera with Infra Red Capability and Built in Microphone using Sony CCD technology. • 12v or 24v power. Model: CCS562...
-
Page 2: Table Of Contents
Table of Contents Warnings ...3 Product Description ...4 Packing List ...4 System Installation...5 Wiring Diagram ...7 Specifications ...9 Troubleshooting ...9... -
Page 3: Warnings
Warnings The product is intended to assist in safe driving and to allow the driver to have a broader rear view while the vehicle is in reverse. You, as the driver, are solely responsible for the safe operation of your vehicle and the safety of your passengers according to local traffic regulations. -
Page 4: Product Description
The heavy duty design and high quality components make the CCS562 ideal for all industrial and commercial applications. The integrated wiring harness and single power wire make this system simple and fast to install. -
Page 5: System Installation
8. Attach reverse & accessory power wires. 9. Connect your reversing camera. Note: When using an Advent CCS System, the signal and power for the camera will be supplied through the monitor extension cable. Please also note that the microphone in the camera will be played on the speaker built into the LCD monitor. - Page 6 Wiring the Camera to the Vehicle’s Reverse Lamp 1. Locate the reverse lamp in the tail light assembly. 2. Using the tap connector supplied, perform the following steps: Place the un-stripped positive lead from the tail lamp in the run channel, which runs completely through the connector. Insert the un-stripped red power wire from the camera completely into the other channel in the connector.
-
Page 7: Wiring Diagram
Wiring Diagram Note: The power and signal will be provided through a single cable from the monitor. -
Page 8: Specifications
No image from backup camera when vehicle placed in reverse Image is mirrored or requires adjustment Sound can not be heard from Advent camera Solution Check that reverse power is attached to orange wire. Check that accessory power is attached to red wire... - Page 10 © 2008 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788...