Assessing Uplink Signal Strength - D-Link EXO AC2000 User Manual

Mesh range extender

Hide thumbs Also See for EXO AC2000:

Table of Contents

Section 2 - Installation

Assessing Uplink Signal Strength

The Status/WPS LED will turn solid green when the DRA-2060 has connected successfully to a wireless network and is extending

that network. If the Smart Signal LED has a single orange bar after the connection process has finished, the DRA-2060 has

established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To improve the

connection quality, the DRA-2060 should be relocated closer to the source wireless router. Using the 5 GHz extension network

is recommended in order to achieve the fastest wireless speeds. If the extender has been configured as an Access Point and is

connected via Ethernet cable to an uplink network, the Smart Signal LED will not be lit.

Poor

Good

Best

D-Link DRA-2060 User Manual

Table of Contents

Dra-2060