External Equipment - Panasonic SC-UA90 Operating Instructions Manual

External equipment

Preparation
• Disconnect the AC mains lead.
• Switch off all equipment and read the appropriate
operating instructions.
Note:
• Do not bend cables at sharp angles.
• Components and cables are sold separately.
• Sound distortion can occur when you use an adaptor.
• If you want to connect equipment other than those
described, refer to the audio dealer.
Using the optical input
You can connect a TV, VCR, DVD player etc., and listen to
the audio through this system.
Rear panel
of this unit
1
Connect the external equipment.
2
Press [SELECT <, >] repeatedly to select "D-IN".
3
Play the external equipment.
Note:
• This system supports linear PCM and Dolby Digital signals.
• Multi-channel source will be converged to 2 channels.
• Sampling frequency: 32 kHz (PCM), 44.1 kHz (PCM) and
48 kHz
• The sound is muted if the signal format or frequency is not
supported.
• If there are sounds coming from the TV's speakers,
decrease the volume of the TV to its minimum.
TV (not supplied)
Optical digital
audio cable
(not supplied)
Using the auxiliary input
You can connect a VCR, DVD player etc., and listen to the
audio through this system.
Rear panel
of this unit
Audio cable
(not supplied)
1
Connect the external equipment.
2
Press [SELECT <, >] repeatedly to select "AUX".
3
Play the external equipment.
█ AUX mode
1
Press [PLAY MENU] to select "AUX MODE".
2
Press [Y, U] to select the mode and then press
[OK].
MODE 1 Select this mode to use the Karaoke effect
(default) function.
MODE 2 Select this mode when watching TV, movies
or using an external player with Karaoke
features.
DVD player (not supplied)
17