Connecting The Ethernet Adapter; Connecting To An Ethernet Device - Enterasys RBTSA-AA Quick Start Manual

3

Connecting the Ethernet Adapter

Before connecting the Ethernet Adapter to an Ethernet client, connect the power supply. The figure
below shows the ports for connecting the power and Ethernet cables.
The Ethernet Adapter can also be connected to a serial device. Serial cables come with a variety of
connector sizes.

Connecting to an Ethernet Device

The Ethernet Adapter is designed to be connected to an Ethernet client device such as a hub, computer,
or printer.
CAUTION: To avoid the possibility of a transmission loop situation between the Ethernet
Adapter and an access point, which could disrupt network operation, do not connect a
Ethernet Adapter that is set in Wireless Client (Infrastructure) mode directly to the LAN (for
example, through a wall port or through a hub that is connected directly to the LAN).
VORSICHT: Um eine Übertragungsschleife zwischen dem Ethernet-Adapter und einem
Access Point zu verhindern, die den Netzwerkbetrieb stören könnte, darf ein im Modus
Wireless Client (Infrastructure) (Drahtloser Client [Infrastruktur]) eingerichteter Ethernet-
Adapter nicht direkt mit dem LAN verbunden werden (z. B. über eine Wandbuchse oder
über einen direkt mit dem LAN verbundenen Hub).
Power
Cable
Ethernet
Cable