Mitsubishi 1540 FD Owner's Manual page 15

NOTE: the hydraulic control lever wil not return to "Neutral" automatically, so the control lever must be
returned manually to Neutral when the implement reaches a maximum height. If the control lever is left
in the "Lift" the relief valve starts operation and the temperature of the hydraulic oil rises thus causing
trouble to the machine. Be sure to move the control lever back to Neutral.
DRAWBAR
The permanent drawbar is provided as standard. To pull an attachment or trailer, be sure to use a
drawbar.
PTO GUARD
In any type of operation, be sure to install the PTO guard for additional safety.
FRONT PTO (OPTIONAL)
The front PTO can be used in either specification of 2-WD or 4-WD. When assembling the front PTO,
install the flange to the rubber coupling with the care that the boss may face to the front side. For
further details, please contact the nearest dealer.
NOTE:
Be sure to cut off the steel band in the rubber coupling after installation.
VERTICLE EXHAUST
The standard muffler setting part is formed square. Make installation of the standard muffler setting it
vertically upright and install a tail pipe (optional), and then it will be usable as up-swept muffler.