Power Supply - Panasonic PV-DC3000 Operating Instructions Manual

Power Supply

Power Supply
Loading the Alkaline Batteries
[ Bottom View ]
Lock Button
WARNING! Do not dispose of Battery in fire, put in backwards, disassemble, or short
circuit; otherwise it may leak or burst, causing possible personal injury.
Battery Notes
Safety precautions:
• Do not mix old and new batteries.
• Do not mix alkaline with manganese
batteries.
• Do not get the AA alkaline batteries near,
or dispose of in fire.
• Do not directly connect (short circuit) the
positive (+) and negative (–) terminals.
• Never attempt to disassemble or
reassemble the Battery.
• Do not drop or jar the Battery.
Note
• Instead of the supplied Alkaline batteries,
you can also use AA type Ni-Cd (high
density type) or nickel Metal-hydride
batteries available on the market.
• If you are not going to use the Digital
Camera for an extended period of time,
remove the batteries from the Digital
Camera.
12
3000.P12-14.p65
Note
• When loading or unloading Batteries, be
sure to slide the Battery Compartment lid
all the way to the end before opening. If
the lid is not slid to the end, Battery
Loading and Unloading may be
impossible.
1
Slide all the way While pressing the Lock Button, slide
to the end. the Battery Compartment lid in the
direction of the arrow and swing it
open.
2
Install four Alkaline Batteries.
• Be sure to use Alkaline Batteries.
Never use manganese batteries.
• Make sure that the positive (+) and (-)
ends of the batteries are facing the
correct direction.
3
Swing the Battery Compartment lid
down and slide it shut.
Operation Time
When using the supplied Panasonic
alkaline batteries, you will have a maximum
of about 120 images* (at an ambient
temperature of 25° C).
* Conditions :
• Using the Panasonic Alkaline batteries.
• Capturing an image every 30 seconds.
• Using Flash once for every other capture.
• Recording mode is Fine.
For assistance, please call : 1-800-272-7033.
12 00/09/25, 10:37