Language - Pioneer BDP-3130 Operating Instructions Manual

5. Press ENTER to enter language setting.
Press a/b select to language.
page：2/5
Choose
an OSD language before starting.
The language selected will be applied not only here
but aslo in other OSD windows, menus etc.
Previous
6. Press ENTER to enter Resolution setting.
Press a/b to select an option. Press ENTER.
Use a/b to select an "Yes" or "No".
7. Press ENTER to enter Aspect ratio setting.
Press a/b to select an option. Press ENTER.
Setup Nevigator
中文(繁体)
English
Next
OK
8. Press ENTER to return Gereral Setting
Menu.
• [Upgrade]
You may select to Upgrade the software from
the USB flash drive.
1. Connect the USB flash drive which contains
the upgrade file package.
2. Follow the instruction on the TV screen to
confirm upgrade operation.
- Upgrade complete the software, the
system will reboot after 5s or Enter key is
pressed.
Notes:
• Do not unplug the power cord or remove
the USB flash drive/disc during software
updating. Also, do not press the reset button
during updating. Otherwise, the updating will
be aborted and malfunction may occur with
the player.
• If the upgrade file package did not pass
the verification, error prompt is displayed ,
check the package again (such as the
package is not complete)
• Make sure the firmware version is not an
old version.
• [BUDA]
During insert more than 1GB empty USB
device, you can operate BD-Live function.
And Blu-ray DVD system will be automatic
name a BUDA content.
BUDA will display Information.
1. Press ENTER.
2. Follow the instruction on the TV screen to
select {BUDA Information}.
3. Press ENTER to select "Fmt buda", BUDA
of files will be cleaned.
• [Quick Start]
{ On } - Select to shorten the required time to
boot up.
{ Off } - Select to perform normal bootup.

Language

Select the OSD(On-Screen Display)
Language, Disc Menu Language, Audio
Language, Subtitle Language default
language for the player.
05
29