5.
Insert the new module into the switch: Holding the new module
with the text on the front panel upright, carefully slide the module into
a lower slot on the rear panel, and press gently until it snaps into
place. Be sure the new module's front panel is flush with the switch
panel.
6.
Secure the new module: Secure the new module in place by
screwing the attached screws clockwise into the switch's chassis.
Tighten them enough to secure the module, but not so tight as to
prevent them from being unscrewed by hand.
9033666
NOTE: Media expansion modules can only be placed in the
lower slots.
Installing the Module 5