Cadillac 2007 Escalade EXT Owner's Manual page 442

9. Connect the other end of the negative ( )
cable to the remote negative ( ) terminal,
on the vehicle with the dead battery.
10. Now start the vehicle with the good battery
and run the engine for a while.
11. Try to start the vehicle that had the dead
battery. If it will not start after a few tries, it
probably needs service.
Notice: If the jumper cables are connected or
removed in the wrong order, electrical
shorting may occur and damage the vehicle.
The repairs would not be covered by your
warranty. Always connect and remove
the jumper cables in the correct order, making
sure that the cables do not touch each other
or other metal.
442
Jumper Cable Removal
A. Heavy, Unpainted Metal Engine Part or
Remote Negative ( ) Terminal
B. Good Battery or Remote Positive (+) and
Remote Negative ( ) Terminals
C. Dead Battery or Remote Positive (+) Terminal