True TRADITIONAL RICH-INS T-23-HC Installation Manual page 21

TRUE
-
traditional reach ins
LAE Control
CHANGING THE "SET POINT":
May need to unlock control.
WHY: The set point is the temperature at which the compressor will shut off.
NOTE: The "set point" IS NOT the cabinet holding temperature.
HOW TO CHANGE THE "SET POINT":
STEP 1 - To see the set point, press and hold the Info button
See image 1.
STEP 2 - While still holding the Info button
Down button to change the "set point".
STEP 3 - Once the "set point" has been set correctly release the Info
button . The display will show temperature. See image 2.
.
, press the Up or
www
Info / Set Point Manual Defrost /
Button Down Button
Manual Activation Stand-By
Up Button Button
. .
truemfg com
1
2
20